Two rooms can have the same equipment and sound completely different. What makes the difference is rarely the name on the front of the box. It is where the seats sit, how the speakers relate to them, what the bass is doing, and how quiet the room is.
These are the questions we are asked most often, with straight answers based on published industry guidance.
Do I need a dedicated room?
No. A dedicated room gives you the most control, but a lounge, loft, garage or outbuilding can all work very well. What matters is how the room is designed, not what it is called. Current industry guidance judges performance in the same way whether it is a private cinema or a family room.
Where should the seats go?
Start here, before choosing any equipment. Pick the seat you will use most and treat it as your main seat. Ideally it sits on the centre line of the room, facing the middle of the screen.
Then try to keep every seat away from the walls, especially the back wall. A speaker close to one person’s ear will dominate what they hear, and the sense of being surrounded is lost. As a guide, the industry’s entry-level target is more than half a metre from any wall, rising to more than a metre and a half in the very best rooms. If a sofa has to go against the back wall, it is usually better to leave out the rear speakers.
How big should the screen be?
Bigger is not always better. The right size depends on how far back you sit, so it is really a question of how much of your view the picture fills. Published guidance points to about 43° for film and up to 61° for 4K.
In practice, if you sit 3.5 metres from the screen, that means a picture roughly 2.8 to 4.1 metres wide. Where you land depends on your own taste, the projector, the room, and what you watch most. It is well worth trying a few seating positions before deciding.
Projector or a big TV?
A projector gives the true cinema feel at large sizes, and works best where you can control the light. A large TV can suit a brighter room that is used every day. Plenty of good rooms are designed around either, and the choice should follow how you will use the space.
Can I have Dolby Atmos in my room?
Very likely. Atmos adds sound from above you, and you will see it described in numbers such as 7.1.4. That means seven speakers around you, a subwoofer channel, and four overhead.
Dolby’s reference layout places overhead speakers at about 45° above the listener, with some flexibility either side. If you cannot fit ceiling speakers, upward-firing speakers can bounce sound off the ceiling, though Dolby advises a flat, reflective ceiling for those, so they suit some rooms better than others. With more than one row of seats, the speakers need planning around the whole seating area, so that everyone hears sound from the right direction.
Why does the bass sound different in different seats?
Because the room itself shapes low notes. Bass builds up in some places and cancels in others, and the difference between two positions can be huge. You may have noticed this if you have ever walked around a room while music was playing.
This is the hardest part of any cinema to get right, and it is why more than one subwoofer often helps. Research favours two or four placed symmetrically, because they even out the bass across the seats. It is not about more bass. It is about the same good bass in every seat.
Will the neighbours or the family hear it?
Probably, unless it is planned for. Stopping sound from travelling is about the structure of the room, and it is far easier to do during a build than afterwards. Bass is the hardest to contain, and even a well-built room will let some through.
Often the weak points are small ones: an ordinary door, gaps around sockets and cables, or a shared duct. One gap can undo a lot of good work. A solid, well-sealed door makes a real difference, and the most demanding rooms are built as a room within a room, usually with an acoustic specialist involved.
A well-sealed room also needs fresh air and somewhere for equipment heat to go, without adding fan noise. If your cinema is part of a loft, garage or extension, plan that from the start and speak to your building control body.
Does it need to look like a recording studio?
Not at all. Good acoustic treatment can sit behind fabric, panels and joinery you would never notice. The aim is a room that sounds clear but still natural. Too much of the wrong treatment is as bad as too little: covering a room in thin foam removes the treble and leaves the bass untouched, so it sounds dull rather than controlled.
What is calibration, and does it matter?
Calibration is the final setup of the picture and sound for your room and your seats. It matters a lot, but it is a finishing touch. It cannot rescue a poorly designed room, which is why seating, speaker positions and bass come first.
When should I start planning?
As early as you can. If you are planning a loft, extension or new build, the cabling, structure and room shape can all be designed in before the walls are finished. That costs far less than changing them later.
Questions worth asking any installer
- Where will the main seat be, and why?
- How will the bass be even across all the seats?
- How quiet will the room be with everything running?
- Where is sound most likely to escape?
- How will the room be set up and checked at the end?
Every room is different, so the best next step is to look at yours. We offer a free design visit, and we are happy to explain the choices behind every design. See our home cinema installation service, or look through our recent projects.

