If you are building a new home or an extension, there is one moment that decides how good your cinema, media wall or smart home will be: first fix. It is the short window after the walls are framed and before they are plastered, when every cable, back box and fixing goes in.
Get it right and everything that follows is simple. Miss it and you are chasing walls, running cables across ceilings or settling for a TV hanging on a bracket with wires down the wall. Here is what we look at with every client, so the room works beautifully from day one.
Start with the room, not the cables
Before a single cable goes in, decide how the room will be used. Where will you sit? Where does the TV or screen go, and at what height? Will it be a media wall with storage and lighting, a media room for everyday family viewing, or a dedicated home cinema with a projector and tiered seating?
Those answers set everything else: the screen size, the speaker positions, the depth of any joinery and where the equipment will live. This is why we always start with a design visit and a drawing, even on a building site. It is far cheaper to move a line on a drawing than a cable in a finished wall.
Power in the right places
Sockets are the most common thing we see in the wrong place. For a media wall or cinema, plan for:
- Power behind the TV, hidden by the screen.
- Sockets inside the cabinets for consoles, streamers and the sound system.
- Power at the projector position in the ceiling, if you are having one.
- A suitable supply for the equipment cabinet, so everything runs from one tidy place.
- Separate circuits for the feature lighting in shelves and niches, with the drivers somewhere you can reach.
Because we are electricians as well as AV installers, we plan the power and the AV together, so nothing is an afterthought.
Cabling: run more than you think you need
Cable is cheap. Getting into a finished wall is not. At first fix we typically run:
- A large pull-through duct from the TV position to the equipment, so cables can be changed in future without opening the wall.
- Data cable to the TV, the equipment cabinet and anywhere you might want a games console or streamer.
- Speaker cable to every speaker position, including ceiling and height speakers for surround sound.
- A feed for the subwoofer, even if you are not sure you want one yet.
- Data cable to ceiling positions for Wi-Fi access points, so you get strong signal in every room.
If you are unsure about something, run the cable anyway and leave it labelled and coiled. It costs very little now and saves a lot of disruption later.
Plan the media wall structure
A media wall is joinery, and it needs the right structure behind it. At first fix we set out the timber framework, add solid fixings where the TV bracket will go, and leave a cable void behind the cabinets so power and AV can run neatly between units. We also allow for the finished sizes, building slightly short so the wall can be scribed perfectly to the room once the plaster and floor are down.
If you would like an inset electric fire, it needs to be decided now. Fires need their own power, the right clearances and space for ventilation, all of which are much easier to build in than to add later.
Lighting and control
Good lighting makes a cinema or living space. Think about the scenes you want: bright for cleaning, soft for evenings, low and warm for a film. That means separate circuits for downlights, feature lighting and any LED in the joinery.
If you would like smart lighting or a whole-home control system, the wiring at switch and keypad positions is different from a standard installation, so it needs to be planned before first fix. The same goes for motorised blinds, heating control and door entry.
Where will the equipment live?
Amplifiers, streamers and network equipment need somewhere ventilated and easy to reach. Under the stairs, a cupboard or a dedicated cabinet in the media wall all work, as long as the cables from every room come back to it. Planning this at first fix keeps the living space clear and makes servicing simple.
Working with your builder
We work alongside builders, architects and other trades all the time. The key is timing. Get us involved at the design stage if you can, and at the latest a couple of weeks before first fix, so the drawings are ready when the walls go up.
Before the plasterboard goes on, we photograph and label everything, so there is a record of where every cable runs. It makes second fix quicker and helps for years to come.
Frequently asked questions
When should I contact you?
Ideally while the plans are being drawn. At the latest, a couple of weeks before first fix, so we can visit, design the room and agree a fixed price before the walls are closed.
Do I need to choose my TV now?
No. We plan for a range of screen sizes and put solid fixings in the right place, so you can choose the TV nearer the time.
Can you work with my builder’s electrician?
Yes. We can carry out the AV and lighting control first fix alongside them, or take on the whole electrical package ourselves, all installed by us.
What if I am not sure I want a cinema or smart home yet?
Run the cables now. The cost is small, and it keeps every option open without opening up finished walls later.
Planning a build in Leeds or Yorkshire?
We design and install home cinemas, media rooms, media walls and smart homes across Leeds, Harrogate and the rest of Yorkshire, with selected projects in Cheshire and Derbyshire. Every project starts with a free design visit, followed by a clear design and a fixed price. If your build is coming up, get in touch and we will help you get first fix right.

